Combustion characteristics of ammonia/air flames for a model swirl burner and an actual gas turbine combustor

Akihiro Hayakawa*1, K.D. Kunkuma A. Somarathne1, Ekenechukwu C. Okafor1, Taku Kudo1, Osamu Kurata2, Norihiko Iki2, Hideaki Kobayashi1
1Institute of Fluid Science, Tohoku University, Japan
2National Institute of Advanced Industrial Science and Technology (AIST), Japan

NH3 Fuel Conference, Los Angeles, September 19, 2016

ABSTRACT

Ammonia is expected not only as hydrogen energy carrier but also as carbon free fuel. For an industrial use of ammonia combustor, ammonia flame stabilized on a swirl combustor should be clarified. However, in order to realize an ammonia-fueled combustor, there are some issues to be solved, such as a difficulty of flame stabilization and reductions of NOx and ammonia emission. In this study, stabilization and emission characteristics of ammonia / air flames stabilized by a model swirl burner are investigated. The outer and inner diameters of the swirler are 24 mm and 14 mm, respectively, and the swirl number is 0.68. The length of the burner liner is 150 mm and the inner diameter is 72 mm. Flame stabilization for various equivalence ratios and outlet mean velocity were investigated and burnt gas components were analyzed by FTIR gas analyzer. Combustion characteristics of the swirl burner were also numerically investigated using Large Eddy Simulation with detailed reaction mechanisms. In addition, ammonia / air flames in an actual gas turbine combustor used for the AIST micro gas turbine with an optical access was also investigated.

DOWNLOAD

This presentation is not available to download.

OTHER NH3 FUEL CONFERENCE PAPERS

2016: Power Generation and Flame Visualization of Micro Gas Turbine Firing Ammonia or Ammonia-Methane Mixture
2015: Enhancement of reaction and stability of ammonia flames using hydrogen addition and swirling flow [PDF]
2015: Micro Gas Turbine Firing Ammonia [PDF]
2014: Micro Gas Turbine Operation with Kerosene and Ammonia

LINKS

Institute of Fluid Science, Tohoku University
National Institute of Advanced Industrial Science and Technology (AIST)
Learn more about the 2016 NH3 Fuel Conference

One response to “Combustion characteristics of ammonia/air flames for a model swirl burner and an actual gas turbine combustor

  1. Pingback: Ammonia Turbine Power Generation with Reduced NOx – Ammonia Energy

Leave a Reply

Your email address will not be published. Required fields are marked *