Effects of the Thickness of the Burner Rim, the Velocities of Fuel and Air on Extinction Limit of Ammonia Coaxial Jet Diffusion Flame

Yohei Ishikawa1, Jun Hayashi1*, Hiroyuki Takeishi1, Takahiro Okanami1, Kimio Iino1, Fumiteru Akamatsu1, Yasuyuki Yamamoto2, Yoshiyuki Hagiwara2
[1] Osaka University; and [2] Taiyo Nippon Sanso, Japan

NH3 Fuel Conference, Minneapolis, November 1, 2017
AIChE Annual Meeting, Topical Conference: NH3 Energy+

ABSTRACT

Ammonia is regarded as one of the alternative fuels because CO2 doesn’t emit during the combustion process of ammonia. Ammonia also has advantages in storage and transportation. In addition, ammonia has a potential to be a “hydrogen carrier” because of high amount of hydrogen content. However, there are several combustion related problems such as the low flammability, the low radiative power and the high NOx formation. To use ammonia as a fuel, therefore, it is necessary to understand the fundamental phenomena of the combustibility of the ammonia such as laminar burning velocity, strength of the radiation and extinction limit. Since a coaxial jet diffusion flame is commonly used on the industrial furnaces, the extinction limit of ammonia coaxial jet diffusion flame is important to know for developing ammonia-flamed furnaces.

In this study, therefore, extinction limit of ammonia coaxial jet diffusion flame was experimentally investigated by verifying the effects of the thickness of the burner rim, the fuel velocity and the oxidizer velocity. In addition, since ammonia flame could not form in the ordinal oxygen concentration of air (21%), the oxygen-enriched combustion was applied on this study. Results showed that the required the oxygen concentration in the oxidizer for making stable ammonia flame on the coaxial jet burner was decreased with increasing the thickness of the burner rim. When the thickness of the burner rim was set to 6.0 mm, three regions with different extinction mechanism of the ammonia coaxial jet diffusion flame were observed. Particularly, the flame extinction caused by the stretch of the flame was appeared under the conditions of high oxidizer velocity.

Read the abstract at the AIChE website.

DOWNLOAD

Download this presentation [PDF, 5.8MB].

RELATED NH3 FUEL CONFERENCE PAPERS

2017: Detailed Observation of Coal-Ammonia Co-Combustion Processes
2017: NH3 / N2 / O2 Non-Premixed Flame in a 10 kW Experimental Furnace – Characteristics of Radiative Heat Transfer
2014: Characteristics of Ammonia / N2 / O2 Laminar Premixed Flame in Oxygen-enriched Condition

LINKS

Department of Mechanical Engineering, Osaka University
Taiyo Nippon Sanso
Learn more about the NH3 Fuel Conference 2017

Leave a Reply

Your email address will not be published. Required fields are marked *