Design Optimization of a Distributed Ammonia Generation System

Matthew Palys*, Alon McCormick, Prodromos Daoutidis
University of Minnesota, United States

NH3 Fuel Conference, Minneapolis, November 2, 2017
AIChE Annual Meeting, Topical Conference: NH3 Energy+

ABSTRACT

Distributed ammonia generation located near farms is a promising alternative to the current practice of large-scale, centralized production. This production mode would reduce the need for transportation of ammonia over long distances currently caused by the mismatch between production and consumption locations. In addition, a small-scale ammonia synthesis process could more easily take advantage of distributed power generation based on wind or sunlight to reduce energy costs and lessen the dependence on fossil fuels. Distributed, renewables-based fertilizer production would largely insulate farmers against market uncertainty while also increasing the sustainability of the agricultural supply chain.

However, a technically proven, economically competitive small-scale ammonia synthesis process which would facilitate this distributed generation paradigm does not currently exist. A wind powered plant which uses a scaled-down Haber-Bosch process has been installed in Morris, Minnesota [1], but ultimately, this process is too complex to operate and too costly for deployment on the scale of a farm or small group of farms. Recently, a novel reactive-separation process for ammonia synthesis has been proposed and proven on a lab scale [2]. A conventional catalyst is used to carry out the synthesis reaction. Then, ammonia is removed via chemisorption while unreacted hydrogen and nitrogen are recycled. This allows equilibrium limitations to be overcome and can facilitate operation at lower pressure and without the large temperature change exhibited in the Haber-Bosch process.

In this work, we develop a dynamic model of the above-described ammonia synthesis process created using gPROMS Process Builder to inform scale-up to pilot plant (1 kg ammonia/day) scale. We study three modes of operation: batch, fed-batch (during which make-up feed is added to maintain constant flow through the reactor) and variable-input (during which feed rate fluctuates dynamically). For each mode of operation, operating conditions and equipment sizes which minimize energy requirements are determined using gPROMS dynamic optimization tools. These optimizations are performed for a range of unit capacities to generate data from which simplified rules for determining capital cost and power requirement are developed.

We then use these rules in determining the economically-optimal design of a distributed ammonia generation superstructure which employs this reactive-separation process. This superstructure uses only renewable energy to provide ammonia fertilizer for a single farm. The full system can consist of PV arrays, wind turbines, a battery bank, hydrogen, nitrogen and ammonia storage vessels, electrolysis and pressure swing adsorption units and a modular ammonia synthesis unit. The net present cost (NPC) of supplying ammonia over a 20 year project lifespan is minimized by determining the optimal selection and size of these units. One year of system operation is considered to account for the seasonal variation of renewable power availability and fertilizer demand. Unit operating conditions are allowed to vary hourly to account for hourly changes in solar and wind power availability; these availability profiles are synthesized using relevant weather data (e.g. insolation, ambient temperature, wind speed) for a typical meteorological year. The total operating cost over the project lifetime is determined by scaling up this single year cost using a discount rate. This problem is formulated as a mixed integer linear program (MILP) and is solved in GAMS using CPLEX.

The NPC of the optimal design will be compared to that of purchasing anhydrous ammonia from the current centralized infrastructure over the same 20-year period. This comparison will be used to determine ammonia market conditions under which the distributed, renewables-powered process becomes economically competitive. Additionally, analyzing each unit’s contribution to the total cost will aid in identifying the most beneficial individual unit efficiency improvements or capital cost reductions.

References:
[1] M. Reese, C. Marquart, M. Malmali, K. Wagner, E. Buchanan, A. McCormick and E. L. Cussler, “Performance of a Small-Scale Haber Process,” Industrial & Engineering Chemistry Research, no. 55, pp. 3742-3750, 2016.
[2] M. Malmali, Y. Wei, A. McCormick and E. L. Cussler, “Ammonia Synthesis at Reduced Pressure via Reactive Separation,” Industrial & Engineering Chemistry Research, vol. 55, no. 33, pp. 8922-8932, 2016.

Read the abstract at the AIChE website.

DOWNLOAD

Download this presentation [PDF, 2.1MB].

RELATED NH3 FUEL CONFERENCE PAPERS

2017: Lower Pressure Ammonia Synthesis
2016: Small Scale Low-Pressure Ammonia Synthesis
2015: Potential Strategies for Distributed, Small-Scale Sustainable Ammonia Production [PDF]
2014: Life-cycle greenhouse gas and energy balance of community-scale wind powered ammonia production
2013: Ammonia Production Using Wind Energy
2012: Lessons Learned in Developing a Wind-to-Ammonia Pilot Plant [PDF]
2011: Production of Anhydrous Ammonia from Wind Energy — Anatomy of a Pilot Plant, The Sequel [PDF]
2010: Production of Anhydrous Ammonia from Wind Energy — Anatomy of a Pilot Plant [PDF]
2009: Ammonia from Wind, Progress Update [PDF]
2008: Ammonia from Wind, an Update [PDF]
2007: Ammonia from Wind, an Update [PDF]
2006: Wind to Ammonia [PDF]

LINKS

Department of Chemical Engineering and Materials Science, University of Minnesota
Learn more about the NH3 Fuel Conference 2017

2 responses to “Design Optimization of a Distributed Ammonia Generation System

  1. Pingback: Improvement of Haber-Bosch: Adsorption vs. Absorption – AMMONIA INDUSTRY

  2. Pingback: Process Superstructures and the Production of Cost-Advantaged Ammonia – Ammonia Energy

Leave a Reply

Your email address will not be published. Required fields are marked *